How To Properly Choose A Chainsaw

June 27, 2021 0 Comments

A chainsaw is basically a portable gas-powered, electricity-, or battery powered saw which cuts through trees with a series of thin teeth secured to a spinning chain driven on a guiding rod. It is commonly used in forestry activities like tree felling, trimming, buckling, pruning, and cutting firebreaks, in wildfire suppression, and harvesting firewood. These chainsaws can also be a great tool for felling large trees for construction projects. However, like any other power tool, safety precautions need to be observed and practiced to avoid accidents. The following are some of the precautions that are important when using a chainsaw.

Studd Helmet Professional Black-Large: Buy Online at Best Prices in  Pakistan | Daraz.pk

One of the most important things to consider before using your chainsaw is the safety of your hands. Make sure that your hands are clean and dry before handling the chain saw and that there are no hairs or dirt stuck in the teeth. Do not use a chainsaw if you have been smoking or have been drinking alcohol because it may affect the safety of your saw. When you have finished cutting the wood, make sure that the fire has completely burned before you put the chainsaw away bestofchinsaw.

When cutting back large branches or long tree trunks, do not pull the chainsaw backwards because this could cause the blade to slip and cause injury. If you must pull the chainsaw backwards, put your weight behind it and don’t move your body at all. It may take several attempts to cut through a thick branch or tree. Also, keep in mind that some chainsaws are only meant to handle thinner branches and will damage and even rip out thicker ones.

One of the most important things to remember is to always use the correct tension setting on the chain saw. While there are many chainsaw enthusiasts who will tell you that you can just adjust the tension to high or low depending on the job that needs to be done, the truth is that using the correct tension is much more important. A chainsaw works using a tension guide. This bar guides the chain between the teeth. The higher the tension the weaker the bar and the shorter the chain.

When cutting a tree trunk, using a chainsaw with a lower tension is usually a good idea. This will ensure that you don’t pull the chain down to hurt yourself. However, if you are cutting a thicker trunk, like a maple tree, you should use a higher tension. Using a chainsaw with too much tension will also lead to ripping out more material from the tree and a shortened life span for your chainsaw. A chainsaw with too little tension is best for cutting a standard size trunk or other smaller branches.

Besides using the proper equipment and a proper saw to get the job done, you should also pay attention to the type of blade you purchase. Although it may seem like a fairly trivial matter, the type of blade can make a huge difference in both accuracy and performance. Some chainsaws have blades made from a hard metal which is very hard to sharpen and clean; this type of chainsaw’s lifetime is about one to two years, far less than a gas chainsaw that uses sodium chlorate or kerosene as its fuel. For this reason you should always consider purchasing a chainsaw with a steel or carbon steel blade.

Leave a Reply

Your email address will not be published. Required fields are marked *